在搬家中，如何處理搬家后遇到家具小問題？淄博搬家公司http://m.xiruige.com.cn/提示說裂縫、孔洞 桌、椅、柜面出現(xiàn)裂縫、孔洞的修補方法有兩種：一是把舊書報剪成碎屑，加入適量明礬與清水煮成糊狀，嵌入縫內，干后很牢。二是用1?誜1白膠水拌木屑調均勻，嵌入裂縫，一晝夜后用砂紙磨光，簡單經(jīng)濟。
In the move, how to deal with after the move furniture small problems? Chapter grave moving company suggests that cracks, holes, cracks in counter, tables and chairs hole repair method has two kinds: one is to put the old books to cut into crumbs, adding suitable amount of alum and boiled into a paste, embed seam, dry very fast. The second is to use 1? Uniform 誜 1 with white glue mixed with sawdust, embedded cracks, with sand after a day and night, simple and economic.
　　鉸鏈松動 可取一細如筷子的木料，削尖涂上白膠水塞于木螺絲孔內錘進，錘進后折斷木條，再將木螺絲重新旋進，即可旋緊。
Loose hinge desirable a fine timber, such as chopsticks sharpened coated with white glue plug in wood screw hole hammer, hammer broken wood, after again will wood screws to precession, then tighten.
　　油漆污點 油漆滴在家具上，未干時可用有蠟水的布抹掉，或用鋼絲絨蘸上蠟油輕輕擦拭。如油漆已干，則可把亞麻籽油滴在油漆上使之變質，然后用布抹掉，再用灰石和蠟油磨光即成。
Paint paint stains on furniture, when working with wax water available cloth to wipe, or dip in with steel wool wax wiped gently. If paint is dry, can the linseed oil droplets of metamorphism in the paint, then wipe with cloth, with a grey stone and wax polish.
　　油漆剝落 清漆家具表面小塊油漆剝落后可取同色廣告顏料涂補，再用清漆涂在表面，即完好如初。
Small paint peeling paint varnish furniture surface with desirable AD after peeling paint, reoccupy varnish coating on the surface, is intact.
　　火灼損傷 先將火灼過的木質用刀片除去，再用鋼絲絨擦干凈，然后用補家具的膠木填好，油磨平滑，再用家具蠟磨光。
Fire damage to the fire burning wood with a razor blade to remove and clean with a steel wool, and then fill with furniture bakelite fill, oil grinding smooth, reoccupy furniture wax polish.
　　抽屜磨損 抽屜道磨損大，可將抽屜拉出翻身，用電烙鐵在抽屜道上燙層蠟燭油，使油液滲入木質。用同法在桌柜相應的道上也燙上蠟燭油，就可減少抽屜磨損。
Drawer abrasion wear big drawer, drawer can be pulled out turn over, with electric iron layer of wax on the drawer path, make the oil infiltration woodiness. Use the same method in the way of the corresponding table ark also hot wax, drawer can reduce wear and tear.
　　金屬家具除銹 可用紗布蘸少許縫紉機油將銹斑擦凈，露出銹蝕處再用1 號細水磨砂紙擦除銹跡，用紗布將銹屑油污揩凈，然后以比例將油漆與松節(jié)油調配，均勻涂在銹蝕處。
Metal furniture cleaning can dip in with cotton gauze wipe a little sewing machine oil will rust stain, revealing corroded place with no. 1 fine grinding abrasive paper erasure rust, chip with gauze will rust oil wipe clean, and in proportion to the paint and turpentine, evenly in the rust.
　　電鍍家具除銹 小件可放入盛有機油的盆里浸泡除銹；大件可用刷子或棉紗蘸機油涂于銹處，片刻后再來回擦拭，即可除去銹跡。
Electroplating furniture cleaning small can be put into the oil bowl soaking derusting; Big oil can use brush or cotton dips in apply rust, wipe again after a short back and forth, can remove the rust.
　　漆澤暗淡 木家具漆面光澤的恢復有兩種辦法。一是用半杯清水加1／4杯醋，用軟布蘸之擦拭。二是用酒精或花露水、茶水浸濕軟布輕拭一二次，再擦一遍地板蠟。
QiZe dark wood furniture paint gloss recovery has two kinds of methods. One is add 1/4 cup of vinegar with half a cup of water, dip in with soft cloth to wipe. The second is a soft cloth soaked in alcohol or toilet water, tea light mop a secondary, wipe the floor wax again.

淄博搬家公司http://m.xiruige.com.cn/